Which roof for which support ? 2018-04-11T10:38:15+01:00

Which roof ? For which support ?

Mon Toit Vert by Vertige is the result of an innovative technique allowing a quick and easy installation of small sedum-type plants, on steel tray, waterproofing, wood panel, waterproofing and concrete support. It provides a living surface that changes appearance depending on the seasons and flowering plants. It can be installed on light structures since the system weighs only 57 kg / m2 at saturation of water. It can be installed on terraced roofs as well as slopes up to 20%. Beyond 20%, Vertige ® has developed a fixing system validated by a control office.

Our green roofs are developed in partnership with CDC Biodiversité, which approves the design, implementation and maintenance procedures.

Technical advice
5.2/17-2556_V1

LNE N° K071649-DE/1
ERP compliant

Extensif 57 Kg/m² water saturation. Typical cut with sterile area on a bearing element at <2% slope.

Extensive 57 Kg/m² water saturation. Typical cut without sterile area on a supporting element at >2% slope.

Intensive 115 Kg/m² water saturation. Cutting type without sterile area on a steel tank on metal structure or wood slope at > 3.5% <20%.

Intensive 115 Kg/m² Typical cut with sterile zone on a bearing element at <2% slope.

Intensive 115 Kg/m² Typical cut without sterile area on a supporting element at >2% slope.

Hyper extensive 40 kg/m² water saturation. Cutting type without sterile area on a steel tank on metal structure or wood slope at >3.5% <20%.

Hyper extensive 40 kg/m² water saturation. Typical cut with sterile area on a bearing element at <2% slope.

Hyper extensive 40 kg/m² water saturation. Typical cut without sterile area on a supporting element at >2% slope.

Curabitur id sed sem, felis fringilla felis ut leo ut ut dolor